+ 返回首页   + 加入收藏   + 联系我们
产品搜索

产品目录
行业标准
联系我们

国外主要无损检测标准题录(电磁检测标准)

标准代号

国外主要无损检测标准(电磁检测标准)

www.tofdtest.com

国际标准:
ISO2178:1982在磁性基体上的非磁性复盖层--复盖层厚度测量--磁测法
Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness-Magnetic method
ISO2360:2003在非磁性金属基体上的非导电复盖层--复盖层厚度测量--涡流法
Non-conductive coatings on non-magneticelectrically conductive basis materials-Measurement of coatingthickness- Amplitude-sensitive eddy current method
ISO2361-82E磁性和非磁性基体上镀镍层厚度的磁性测量方法(NDT,87-2)
ISO2361:1982在磁性和非磁性基体上的电镀层--镀层厚度测量--磁测法
Electrodeposited nickel coatings on magnetic and non-magnetic substrates-Measurement of coating thickness -- Magnetic method
ISO N237铸钢件的磁粉探伤
ISO3059:2002无损检测渗透检验和磁粉检验 观察条件 黑光源的间接评定方法(TC135)
ISO4309-1981起重机械用钢丝绳检验和报废实用规范
ISO5065/1磁粉检验指示器-第1部分:特性
ISO5065/2磁粉检验指示器-第2部分:试验
ISO DP5578磁粉检验用磁化设备
ISO4986:1992钢铸件-磁粉检验
Steel castings-Magnetic particle inspection
ISO6933:1986铁道轧材--磁粉验收试验
Railway rolling stock material -- Magnetic particle acceptance testing
ISO9302:1994无缝和焊接( 埋弧焊除外)承压钢管--验证液压密封性的电磁检验
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Electromagnetic testing for verification of hydraulic leak-tightness
ISO9304:1989无缝和焊接( 埋弧焊除外)承压钢管--探测缺陷的涡流检验
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Eddy current testing for the detection of imperfections
ISO9402:1989无缝和焊接( 埋弧焊除外)承压钢管--探测铁磁性钢管纵向缺陷的全圆周磁传感器/ 漏磁检验
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
ISO9598:1989受压无缝钢管探测铁磁性钢管横向缺陷的全圆周磁传感器/ 漏磁检验
Seamless steel tubes for pressure purposes-Fullperipheral magnetic transducer/flux leakage testing offerromagnetic steel tubes for the detection of transverseimperfections
ISO9934-1:2001无损检测--磁粉检测--第1部分:总则
Non-destructive testing-Magnetic particle testing-Part 1:General principles
ISO9934-2:2002无损检测--磁粉检测--第2部分:检测介质
Non-destructive testing-Magnetic particletesting-Part 2: Detection media
ISO9934-3:2002无损检测--磁粉检测--第3部分:设备
Non-destructive testing-Magnetic particle testing-Part 3:Equipment
ISO 12718无损检测--涡流检测--词汇
ISO13664:1997无缝和焊制承压钢管管端分层缺陷的磁粉检测
Seamless and welded steel tubes for pressure purposes-Magneticparticle inspection of the tube ends for the detection of laminarimperfections
ISO13665:1997无缝和焊制承压钢管管体表面缺陷的磁粉检测
Seamless and welded steel tubes for pressure purposes-Magneticparticle inspection of the tube body for the detection of surfaceimperfections
ISO 15548-1无损检测--涡流检验设备--仪器特性与校验
ISO 15548-2无损检测--涡流检验设备--探头特性与校验
ISO 15548-3无损检测--涡流检验设备--系统特性与校验
ISO15549:1999无损检测--涡流检验--一般原理
ISO 17638:2003焊缝无损检测--磁粉检测
Non-destructive testing ofwelds-Magnetic particle testing
ISO 17643:2005焊缝无损检测--利用复平面分析的涡流检测
Non-destructive testing of welds-Eddy current testing of weldsby complex-plane analysis
ISO 23278:2006焊缝无损检测--焊缝的磁粉检测--验收等级
ISO 24497-1无损检测--金属磁存储器-第1部分:一般要求
ISO 24497-2无损检测--金属磁存储器-第2部分:术语与定义
ISO 24497-3无损检测--金属磁存储器-第3部分:焊缝的检验
ISO 25902-1钛管无损检测--第1部分:涡流检验
欧洲标准化委员会标准:
EN1290:1998焊缝无损检测焊缝的磁粉检验
Non-destructive examination of welds-Magnetic particleexamination of welds
EN1291:1998焊缝无损检测焊缝的磁粉检验 验收等级
Non-destructive examination of welds-Magnetic particle testing of welds-Acceptance levels
EN1330/5:1998无损检测词汇涡流检测所用术语
Non-destructive testing-Terminology-Part 5:Terms used in Eddycurrent testing
EN1369:1996铸件磁粉检查
EN1711:2000焊缝无损检测基于复平面分析的焊缝涡流检测
Non-destructive examination of welds-Eddy current examination of welds by complex plane analysis
EN1956:无损检测渗透检测和磁粉检测
EN1971:铜和铜合金的涡流检测
EN2857/1:磁粉检测总则
EN2857/2:检查要求
EN ISO 3059:2001无损检测 渗透检测和磁粉检测观察条件
Non-destructivetesting-Penetrant testing and magnetic particle testing-Viewingconditions(ISO 3059:2001)
EN ISO9934-1:2001/A1:2003无损检测 磁粉检测第1部分:一般原理
Non-destructivetesting-Magnetic particle testing-Part 1:General principles(ISO9934-1:2003)
EN ISO 9934-2:2002无损检测 磁粉检测第2部分:检测介质
Non-destructivetesting-Magnetic particle testing-Part 2:Detection media(ISO9934-2:2002)
EN ISO 9934-3:2002无损检测 磁粉检测第3部分:设备
Non-destructivetesting-Magnetic particle testing-Part 3:Equipment(ISO9934-3:2002)
EN10228/1:1999磁粉检查
EN10246/1:1996无缝与焊接(埋弧焊除外)铁磁性钢管的自动电磁检测-验证液压密封性
EN10246/2:2000无缝与焊接(埋弧焊除外)奥氏体和奥氏体铁素体钢管的自动涡流检测-验证液压密封性
EN10246/3:1999无缝与焊接(埋弧焊除外)钢管的自动涡流检测-探伤
EN10246/4:1999无缝铁磁性钢管的自动全圆周磁传感器/漏磁检测-检测横向缺陷
EN10246/5:1999无缝与焊接(埋弧焊除外)铁磁性钢管的自动全圆周磁传感器/漏磁检测-检测纵向缺陷
EN10246/12:2000无缝与焊接铁磁性钢管的磁粉检测-检测表面缺陷
EN10246/18:2000无缝与焊接铁磁性钢管管端面的磁粉检测-检测层状缺陷
EN12084:2001/A1:2003无损检测 涡流检测一般原理和指南
Non-destructivetesting-Eddy current testing-General principles and guidelines
EN 13860-1:2003无损检测 涡流检测设备性能与验证 第1部分:仪器性能与验证
Non-destructive testing-Eddy current examination-Equipmentcharacteristics and verification-Part 1:Instrument characteristicsand verification
EN 13860-2:2003无损检测 涡流检测设备性能与验证 第2部分:探头性能与验证
Non-destructive testing-Eddy current examination-Equipmentcharacteristics and verification-Part 2:Probe characteristics andverification
EN 13860-3:2003无损检测 涡流检测设备性能与验证 第3部分:系统性能与验证
Non-destructive testing-Eddy current examination-Equipmentcharacteristics and verification-Part 3:System characteristics andverification
EN WI45:2002涡流检测设备
美国相关标准
日本:
JIS C2501-1998长久磁铁试验方法 Methods of test for permanent magnet
JIS G0565-1992铁磁性材料磁粉检验方法及磁粉显示等级 (INDT,84-2 1982年版)
METHOD FOR MAGNETIC PARTICLE TESTING OF FERROMAGNETIC MATERIALS AND CLASSIFICATION OF MAGNETIC PARTICLE INDICATION
JIS G0568-1993钢制产品的环绕线圈法涡流检测
Methodfor eddy current testing of steel products by encircling coiltechnique
JIS G0583-2004钢管的涡流检验方法 Eddy currentexamination of steel pipes and tubes
JIS H0502-1986铜及铜合金管的涡流检测方法
METHOD OFEDDY CURRENT TESTING FOR COPPER AND COPPER ALLOY PIPES ANDTUBES
JIS H 0505-1975有色金属材料的电阻率及导电率测定方法
Measuring methods for electrical resistivity and conductivityof non-ferrous materials
JIS H 0515-1992钛管的涡流检验 Eddy currentinspection of titanium pipes and tubes
JIS H 0601:62锗的电阻率测定方法
JIS H 0602:95硅单晶及硅薄片的四探针法电阻率测定方法
JIS Z 2314-1991涡流试验仪器性能特性试验方法
Testmethods for performance characteristics of eddy current testinginstruments
JIS Z 2315-1991涡流探伤系统性能特性试验方法
TESTMETHODS FOR PERFORMANCE CHARACTERISTICS OF EDDY CURRENT FLAWDETECTING SYSTEM
JIS Z 2319-1991漏磁试验方法Methods for magnetic leakage fluxtesting
JIS Z 2321-1993用于磁粉检测的交流磁轭 AC YOKE MAGNETFOR MAGNETIC PARTICLE TESTING
JIS Z 2340:2002磁粉和渗透检验中目视校验计较准方法的确认
Confirmation method of calibration by visual calibration gauge onmagnetic particle and liquid penetrant testing 
JIS Z 2343-3:2001无损检测 渗透检测 第3部分:参考试块
Non-destructive testing -- Penetrant testing -- Part 3: Referencetest blocks
JIS Z 8202-5-2000量值和单位 第5部分:电学和磁学Quantities and units - Part 5:Electricity and magnetism
JIS W 1202-1986宇航用涡流法对铝合金热处理测量的电导试验
Electrical conductivity test formeasurement of heat treatment of aluminum alloys, eddy currentmethod, for aerospace use
JIS W4031-82宇航用磁粉检验方法 INSPECTIONPROCESS OF MAGNETIC PARTICLE FOR AEROSPACE USE
NDIS3101-84涡流探伤装置单项性能的测试及其表示方法
NDIS3102-84涡流探伤装置综合性能的测试及其表示方法
NDIS3301-77磁粉探伤用C1型标准试片
NDIS3404-82漏磁探伤测试方法(INDT,85-3)
NDIS3105-83交流磁轭磁粉检验装置性能与试验方法
NDIS3403-81表面缺陷检测方法
德国:
DIN 50470-1980永磁材料的检测 测定磁轭的退磁曲线和永磁导磁率感应法
Testing of permanentmagnet materials; Determination of the demagnetization curve andpermanent permeability in a yoke; Inductive method
DIN 50472-1981长久磁铁的检测在工作范围内测定磁通量值
Testing ofpermanent magnets; determination of the magnetic flux values in theworking range
DIN 50933-1987用探针式差动测量器测量涂层厚度
Measurement of coating thickness bydifferential measurement using a stylus instrument
DIN50981-79用磁粉法测量铁素体材料非铁磁性层的厚度
DIN50984-78用涡流法测量非铁素体母材的非导电层厚度
DIN50985-77用电容法测量导电母材上非导电层的厚度
DIN54121-65磁粉探伤定义及检验证明
DIN 54130-1974无损检测 漏磁检测 通则
Non-destructive testing; magneticleakage flux testing, general
DIN54131T1-84除携带式以外的固定式与移动式磁粉检验设备性能及测定方法
DIN54131T2-84携带式磁粉检验设备性能及测定方法
DIN54132-80磁粉检验介质的性能测定
DIN 54136-1-1988无损检测 带扫描探头的漏磁检测原理
Non-destructive testing;magnetic leakage flux testing by scanning with probes;principles
DIN 54140-3-1989无损检测 电磁法测试线圈组件的图像和一般特性
Non-destructive testing; electromagnetic methods;representation and general characteristics of test coilassemblies
DIN54140T1-76电磁(涡流)法检测的一般规则
DIN54140T2-84电磁检测名词术语
DIN 54141-1-1982无损检测 管子的涡流检测用同心试验线圈和单频率法检测的一般注意事项
Non-destructive testing; Eddy current testing of pipes andtubes; General remarks on testing using concentric test coils andthe single-frequency method
DIN 54141-2-1982无损检测 管子的涡流检测同心试验线圈的涡流检测系统性能测定与校验的参考方法 Non-destructive testing; Eddy current testing of pipes andtubes; Reference method for the determination and calibration ofthe properties of an eddy current testing system using concentrictest coils
DIN 54141-3-1987无损检测 管子的涡流检测 方法
Non-destructive testing; eddy currenttesting of pipes and tubes; procedure
DIN54141T1-82穿过式线圈单频法管材涡流检测(NDT,86-1)
DIN54141T2-82穿过式线圈涡流检验装置性能的测定方法
DIN54141T3-85涡流检测的实施
DIN25435T2-79核技术设备定期磁粉检验
DIN V VDE V0848-4/A3-1995电磁场中的安全性 在0*30KHz频率范围的人员防护修订3
Safety inelectromagnetic fields - Protection of persons in the frequencyrange from 0 to 30 kHz; Amendment A3
DIN EN 1290-2002焊缝的无损检测 焊缝的磁粉检测
Non-destructive testing of welds -Magnetic particle testing of welds; German version EN 1290:1998 +A1:2002
DIN EN 1291-2002焊缝的无损检测 焊缝的磁粉检测验收等级
Non-destructivetesting of welds - Magnetic particle testing of welds - Acceptancelevels; German version EN 1291:1998 + A1:2002
DIN EN 1330-5-1998无损检测术语第5部分:涡流检测
Non-destructivetesting - Terminology - Part 5: Terms used in Eddy Current testing;trilingual version EN 1330-5:1998
DIN EN 1369-1997铸造 磁粉检验 Founding - Magnetic particle inspection; German version EN 1369:1996
DIN EN 1971-1998铜和铜合金 管子的涡流检测
Copper and copper alloys - Eddycurrent test for tubes; German version EN 1971:1998
DIN EN 1711-2000焊缝的无损检验焊缝的复平面分析涡流检验
Non-destructive examination of welds - Eddy current examinationof welds by complex plane analysis; German version EN1711:2000
DIN EN 10228-1-1999钢锻件的无损检测第1部分:磁粉检验
Non-destructivetesting of steel forgings - Part 1: Magnetic particle inspection;German version EN 10228-1:1999
DIN EN 10246-1-1996钢管的无损检测第1部分:验证无缝和焊接铁磁钢管(埋弧焊除外)水压密封性的自动电磁检测 Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-1:1996
DIN EN10246-3-2000 钢管的无损检测第3部分:探测无缝和焊接钢管(埋弧焊接除外)不完整性的自动涡流检测Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; German version EN 10246-3:1999
DIN EN 10246-4-2000钢管的无损检测第4部分:探测铁磁无缝钢管横向不完整性的自动全圆周磁探头/磁漏检测 Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999
DIN EN 10246-5-2000钢管的无损检测第5部分:探测无缝和焊接(埋弧焊接除外)铁磁钢管纵向不完整性的自动全圆周磁探头/磁漏检测 Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections; German version EN 10246-5:1999
DIN EN10246-18-2000钢管的无损检测第18部分:探测无缝和焊接铁磁钢管管端层状不完整性的磁粉检验 Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections; German version EN 10246-18:2000
DIN EN 12084-2001无损检测 涡流检测一般原理和基本指南
Non-destructivetesting - Eddy current testing - General principles and basicguidelines; German version EN 12084:2001
DIN EN 13860-1-2003无损检测 涡流检验 设备特性和验证第1部分:仪器特性和验证
Non-destructive testing - Eddy current examination; Equipmentcharacteristics and verification - Part 1: Instrumentcharacteristics and verification; German version EN13860-1:2003
DIN EN 13860-2-2003无损检测 涡流检验 设备特性和验证第2部分:探头特性和验证
Non-destructive testing - Eddy current examination; Equipmentcharacteristics and verification - Part 2: Probe characteristicsand verification; German version EN 13860-2:2003
DIN EN ISO2178-1995磁性基体上的非磁性涂镀层 涂镀层厚度测量磁性法
Non-magnetic coatingson magnetic substrates - Measurement of coating thickness -Magnetic method (ISO 2178:1982); German version EN ISO2178:1995
DIN EN ISO2360-1995非磁性基体金属上的非导体涂层 涂层厚度测量涡流法
Non-conductive coatingson non-magnetic basis metals - Measurement of coating thickness -Eddy current method (ISO 2360:1982); German version EN ISO2360:1995
DIN EN ISO2361-1995磁性和非磁性基体上的镍电镀层 镀层厚度测量磁性法
Electrodeposited nickelcoatings on magnetic and non-magnetic substrates - Measurement ofcoating thickness - Magnetic method (ISO 2361:1982); German versionEN ISO 2361:1995
DIN EN ISO9934-1-2002无损检测 磁粉检测第1部分:一般原理
Non-destructivetesting - Magnetic particle testing - Part 1: General principles(ISO 9934-1:2001); German version EN ISO 9934-1:2001
DIN EN ISO9934-2-2003无损检测 磁粉检测第2部分:探测介质
Non-destructivetesting - Magnetic particle testing - Part 2: Detection media (ISO9934-2:2002); German version EN ISO 9934-2:2002
DIN EN ISO9934-3-2002无损检测 磁粉检测第3部分:设备
Non-destructivetesting - Magnetic particle testing - Part 3: Equipment (ISO9934-3:2002); German version EN ISO 9934-3:2002
英国:
BS 1881-204-1988混凝土试验-电磁式保护层厚度计应用的推荐方法
BS 3680/3H:1993利用线圈全部长、宽的电磁方法
BS 3683-2-1985无损检测术语 磁粉探伤
Glossary of terms used innon-destructive testing - Magnetic particle flaw detection
BS 3683Pt.5-83涡流检测名词术语
BS 3889Pt.2A-86(1991)管道和管子无损检测方法锻钢管的涡流检测
BS 3889Pt.2B-82管道和管子无损检测方法有色金属管的涡流检测
BS4069-82磁粉探伤用磁粉及磁悬液(INDT,84-2)
BS4080/1:用磁粉探伤显示表面缺陷
BS4397-69焊缝的磁粉检测方法(WSTS,85-4)
BS 4408Pt.1-69混凝土复盖层的电磁测量方法
BS4489:1984无损检测中评定黑光的方法
BS5044-73(1987)磁粉探伤用反差增强涂料
BS5138-74(2000)精加工整体锻造及落锤锻曲轴的磁粉检验
BS 5411Pt.3-84非磁性基体上非导电复盖层厚度的涡流检测
BS 5411Pt.9-84非磁性基体上镀镍层厚度的磁性检测方法
BS 5411Pt.11-84磁性基体上非磁性复盖层厚度的磁性测量方法
BS6072-81(1986)缺陷的磁粉检验方法(81年版在INDT 84-2)
BS 6404-5-1995磁性材料 永磁(硬磁)材料磁性能测量方法
Magnetic materials- Permanent magnet (magnetically hard) materials - Methods ofmeasurement of magnetic properties
BS DD ENV50166-1-1995人体电磁场照射 低频(0 Hz * 10kHz)
Human exposure toelectromagnetic fields - Low frequency (0 Hz to 10 kHz)
BS DD ENV50166-2-1995人体电磁场照射 高频(10 kHz * 300GHz)
Human exposure toelectromagnetic fields - High frequency (10 kHz to 300 GHz)
BS M35材料及工件的磁粉检验
BS EN 1290-1998焊缝的无损检验 焊缝的磁粉检验
Non-destructive examination of welds -Magnetic particle examination of welds
BS EN 1291-1998焊缝的无损检验 焊缝的磁粉检验验收等级
Non-destructiveexamination of welds - Magnetic particle testing of welds -Acceptance levels
BS EN 1330-5-1998无损检测术语-涡流检测 Non-destructivetesting - Terminology - Terms used in eddy current testing
BS EN 1369-1997铸造-磁粉检验 Founding - Magneticparticle inspection
BS EN 10228-1-1999锻钢件无损检测-磁粉检验Non-destructive testing of steelforgings - Magnetic particle inspection
BS EN 10246-1-1996钢管的无损检测-铁磁性无缝与焊接(埋弧焊除外)钢管验证水压试验的自动电磁检测
Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
BS EN 10246-2-2000钢管的无损检测-奥氏体与奥氏体-铁素体无缝与焊接(埋弧焊除外)钢管验证水压试验的自动涡流检测
BS EN 10246-3-2000钢管的无损检测-探测无缝与焊接(埋弧焊除外)钢管不完整性的自动涡流检测
Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
BS EN 10246-4-2000钢管的无损检测-铁磁性无缝钢管横向不完整性自动全圆周磁探头/漏磁检测
Non-destructive testing of steel tubes -Automatic full peripheral magnetic transducer/flux leakage testingof seamless ferromagnetic steel tubes for the detection oftransverse imperfections
BS EN 10246-5-2000钢管的无损检测-铁磁性无缝与焊接(埋弧焊除外)钢管纵向不完整性自动全圆周磁探头/漏磁检测 Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
BS EN 10246-12-2000钢管的无损检测探测无缝和焊接铁磁钢管表面不完整性的磁粉检验
Non-destructive testing of steel tubes - Magnetic particleinspection of seamless and welded ferromagnetic steel tubes for thedetection of surface imperfections
BS EN 10246-18-2000钢管的无损检测探测无缝和焊接铁磁钢管管端层状不完整性的磁粉检验
Non-destructive testing of steel tubes - Magnetic particleinspection of tube ends of seamless and welded ferromagnetic steeltubes for the detection of laminar imperfections
BS EN 12084-2001无损检测-涡流检测-一般原理与指南
Non-destructive testing - Eddy current testing - Generalprinciples and guidelines
BS EN ISO 2178-1995磁性基体上非磁性涂层的厚度测量-磁性法
Non-magnetic coatings on magnetic substrates - Measurement ofcoating thickness - Magnetic method
BS EN ISO 2360-1995非磁性金属基体上非导电涂层的厚度测量-涡流法
Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method
BS EN ISO 2361-1995磁性和非磁性基体上镍镀层的厚度测量-磁性法
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method
BS EN ISO9934-1-2001无损检测 磁粉检测 一般原理Non-destructive testing - Magneticparticle testing - General principles
BS EN ISO9934-2-2002无损检测 磁粉检测 探测介质Non-destructive testing - Magneticparticle testing - Detection media
BS EN ISO9934-3-2002无损检测 磁粉检测 设备Non-destructive testing - Magneticparticle testing - Equipment
法国:
NFA04-101-64冶金产品磁粉检测(磁悬液检测)
NFA04-121-74钢制长条形制品表面缺陷的磁粉检验
NF A04-193-1997铸造 磁粉检验 Founding - Magnetic particle inspection.
NF A05-115-1999铜及铜合金 管子的涡流检测Copper and copper alloys. Eddy currenttest for tubes.
NF A09-020-5-1998无损检测术语第5部分:涡流检测
Non-destructivetesting. Terminology. Part 5 : terms used in Eddy Currenttesting.
NFA09-125-82冶金制件磁粉探伤的一般原理
NF A09-160-2001无损检测 涡流检测一般原理和指南
Non-destructivetesting - Eddy current testing - General principles andguidelines.
NF A09-590-1-2002无损检测 磁粉检测第1部分:一般原理
Non-destructivetesting - Magnetic particle testing - Part 1 : generalprinciple.
NF A09-590-3-2002无损检测 磁粉检测第3部分:设备
Non-destructivetesting - Magnetic particle testing - Part 3 : equipment.
NFA49-871-81铁磁性钢管纵向缺陷的探头检漏法检测
NFA49-872-83穿过式线圈法的钢管涡流探伤
NF A49-875-1-1996钢管的无损检测第1部分:无缝和焊接铁磁钢管(埋弧焊除外)验证水压试验的自动电磁检测 Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.
NF A49-875-2-2000钢管的无损检测第2部分:无缝和焊接奥氏体和奥氏体铁素体钢管(埋弧焊除外)验证水压试验的自动涡流检测 Non-destructive testing of steel tubes - Part 2 :automatic eddy current testing of seamless and welded (exceptsubmerged arc-welded) austenitic and austenitic-ferritic steeltubes for verification of hydraulic leak-tightness.
NF A49-875-3-2000钢管的无损检测第3部分:探测无缝和焊接钢管(埋弧焊除外)不完整性的自动涡流检测 Non-destructive testing of steel tubes - Part 3 : automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections.
NF A49-875-4-2000钢管的无损检测第4部分:探测无缝铁磁钢管横向不完整性的自动全圆周磁探头/磁漏检测 Non-destructive testing of steel tubes - Part 4 : automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections.
NF A49-875-5-2000钢管的无损检测第5部分:探测无缝和焊接(除埋弧焊)铁磁钢管纵向不完整性的自动全圆周磁探头/漏磁检测 Non-destructive testing of steel tubes - Part 5 :automatic full peripheral magnetic transducer/flux leakage testingof seamless and welded (except submerged arc welded) ferromagneticsteel tubes for the detection of longitudinal imperfections.
NF A49-875-12-2000钢管的无损检测第12部分:探测无缝和焊接铁磁钢管表面不完整性的磁粉检验
Non-destructive testing of steel tubes - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections.
NF A49-875-18-2000钢管的无损检测第18部分:探测无缝和焊接铁磁钢管管端层状不完整性的磁粉检验 Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections.
NF A89-550-1998焊缝的无损检验 焊缝的磁粉检验
Non-destructive examination of welds -Magnetic particle examination of welds.
NF A89-550/A1-2002焊缝的无损检测 焊缝的磁粉检测
Non-destructive testing of welds -Magnetic particle testing of welds.
NF A89-551-1998焊缝的无损检验 焊缝的磁粉检测验收等级
Non-destructiveexamination of welds - Magnetic particle testing of welds -Acceptance levels.
NF A89-551/A1-2002焊缝的无损检测 焊缝的磁粉检测验收等级
Non-destructivetesting of welds - Magnetic particle testing of welds - Acceptancelevels.
NF A91-112-1995磁性基体上的非磁性涂层 涂层厚度测量磁性法
Non-magnetic coatingson magnetic substrates. Measurement of coating thickness. Magneticmethod.
NFA91-113-1995非磁性基体金属上的非导电涂层 涂层厚度测量涡流法
Non-conductive coatingson non-magnetic basis metals. Measurement of coating thickness.Eddy current method.
NF A91-120-1995磁性和非磁性基体上的镍电镀层 镀层厚度测量磁性法
Electrodeposited nickelcoatings on magnetic and non-magnetic substrates. Measurement ofcoating thickness. Magnetic method.
NF F01-141-1987铁路车辆 传动齿轮 磁检验Rolling stock. Running gear.Magnetoscopic examination.
前苏联:
гост19793-74磁力探伤机及磁化设备一般技术要求
гост21105-75磁粉检测方法
ПИ1.2.238-83材料与零件质量的涡流无损检测
РТМ1.2.020-81航空零件的磁粉法检验
北京总部地址:北京市海淀区龙岗路51号 邮编:100196 电话:010-51650108、82376306、82373682 传真:010-82373682 上海办事处电话:18911635690
公司法律顾问: 叶春律师 律师执业证:10101200710861398

京ICP备09057988号
 

京公网安备 11010802025974号