国际标准: |
ISO5-1:1984 | 照相术 密度测量**部分:术语、符号和标志 Photography -- Density measurements -- Part 1: Terms, symbols and notations |
ISO5-2:2001 | 照相术 密度测量**部分:透射密度的几何条件 Photography -- Density measurements -- Part 2: Geometric conditions for transmission density |
ISO5-3:1995 | 照相术 密度测量第三部分:光谱条件 Photography -- Density measurements -- Part 3: Spectralconditions |
ISO5-4:1995 | 照相术 密度测量第四部分:反射密度的几何条件 Photography -- Density measurements -- Part 4: Geometric conditions for reflection density |
ISO1106/1:1984 | 熔焊接头射线检验推荐实施方法 **部分:厚度≤50MM钢板的熔焊对接接头(NDT,86-8) |
ISO1106/2:1985 | 熔焊接头射线检验推荐实施方法**部分: 厚度>50MM, ≤200mm 钢板熔焊对接接头 |
ISO1106/3:1984 | 熔焊接头射线检验推荐实施方法第三部分: 壁厚≤50mm钢管的熔焊环接头(TC44) |
ISO1027:1983 | 用于无损检测的射线照相象质指示器--原理和标志(NDT,85-6) |
ISO1757:1996 | 个人用射线照相剂量计 Personal photographic dosemeters |
ISO/R2405-72E | 厚度50-200mm钢板对接焊缝的射线检测(NDT,86-8) |
ISO2437:1972 | 厚度5-50mm铝及铝合金,镁及镁合金熔焊对接接头X 射线检验的推荐实施方法 |
ISO2504:1973 | 焊缝的射线照相及底片的观察条件 像质计(IRQ)推荐图的利用 Radiography of welds and viewing conditionsfor films -- Utilization of recommended patterns of image qualityindicators (I.Q.I.) |
ISO 2855:1976 | 放射性材料 包装内存物泄漏和辐射泄漏的检测 Radioactivematerials -- Packagings -- Test for contents leakage and radiationleakage |
ISO2919:1999 | 辐射防护 密封射线源一般要求和分类 Radiation protection -- Sealed radioactive sources -- Generalrequirements and classification |
ISO3497:2000 | 金属涂层 涂层厚度测量X射线光谱法 Metallic coatings -- Measurement of coating thickness -- X-rayspectrometric methods |
ISO3543:2000 | 金属和非金属涂层--厚度测量--β背散射法 Metallic and non-metallic coatings -- Measurementof thickness -- Beta backscatter method |
ISO3777:1976 | 铝和铝合金电阻点焊的射线照相检验推荐实施方法(TC44) |
ISO3897:1992 | 照相术 经处理照相感光板存储方法 |
ISO3999-1:2004 | 辐射防护工业γ射线照相装置 **部分:性能、设计和试验技术要求 Radiation protection-Apparatus for industrial gamma radiography-Specifications for performance, design and tests |
ISO4037-1:1996 | 用于校准剂量计和剂量率计及用于测定其响应与光子能量关系的X和γ参考辐射 第1部分:辐射特性和产生方法 |
ISO4037-2:1997 | 用于校准剂量计和剂量率计及用于测定其响应与光子能量关系的X和γ参考辐射第2部分:用于能量范围超过8KeV到1.3MeV及4MeV到9MeV辐射防护的剂量测定法 |
ISO4037-3:1997 | 用于校准剂量计和剂量率计及用于测定其响应与光子能量关系的X和γ参考辐射第3部分:个人剂量仪作用范围的校准及其响应与入射能量和角度关系的测定 |
ISO/TR 4826:1979 | 密封放射源 泄漏检测方法 Sealed radioactive sources -- Leaktest methods |
ISO4993:1987 | 钢铸件--射线照相检验(WSTS,88-2) Steel castings -- Radiographic inspection |
ISO5466:1996 | 照相术经处理的**照相胶片 存储的通常做法 |
ISO5576:1997(B) | 无损检测 工业用x和r射线放射学词汇 Non-destructive testing-- Industrial X-ray and gamma-ray radiology -- Vocabulary |
ISO5579:1998(E) | 无损检测金属材料X射线和γ射线照相检验--基本规则(<无损检测>2002.10) Non-destructive testing -- Radiographic examination of metallic materials by X- and gamma rays -- Basic rules |
ISO5580:1995 | 无损检测工业射线照相底片照明装置 *低要求 Non-destructive testing -- Industrial radiographic illuminators -- Minimum requirements |
ISO5655:2000 | 照相术--工业射线照相胶片(卷和张)和金属增感屏 尺寸--工业射线照相 Photography -- Industrial radiographic films (roll and sheet) and metal intensifying screens -- Dimensions |
ISO3497-76 | 金属包复层厚度的χ射线测量 |
ISO7004:2002 | 照相术--工业射线照相胶片--X和γ射线曝光时ISO感光速率、ISO平均梯度及ISO梯度G2和G4的测定 Photography -- Industrialradiographic films -- Determination of ISO speed, ISO averagegradient and ISO gradients G2 and G4 when exposed to X- andgamma-radiation |
ISO7212:1986 | 电离辐射防护栏50和100mm厚铅屏蔽装置 Enclosures for protection against ionizing radiation -- Lead shielding units for 50 mm and 100 mm thick walls |
ISO9584:1993 | 外科植入材料金属铸造外科植入材料的射线照相检查 |
ISO9915:1992 | 铝合金铸件--射线照相检验 Aluminium alloy castings -- Radiography testing |
ISO9978:1992 | 辐射防护 密封放射源漏泄检测方法 Radiation protection -- Sealed radioactive sources -- Leakagetest methods |
ISO10214:1991 | 照相术 经处理照相材料胶片存放盒 |
ISO10602:1995 | 照相术经处理的银凝胶型黑白底片 稳定性规范(TC42) |
ISO10647:1996 | 校准和测量用于辐射防护的中子测量装置响应的程序 |
ISO11537:1998 | 无损检测热中子射线照相检测 一般原理和基本规则 Non-destructive testing -- Thermal neutron radiographictesting -- General principles and basic rules |
ISO11699-1:1998 | 无损检测 工业射线照相胶片第1部分:工业射线照相胶片系列的分类(<无损探伤>2002-1) Non-destructive testing --Industrial radiographic films -- Part 1: Classification of filmsystems for industrial radiography |
ISO11699-2:1998 | 无损检测 工业射线照相胶片第2部分:用参考值控制胶片处理(<无损探伤>2002-1) Non-destructive testing -- Industrialradiographic films -- Part 2: Control of film processing bymeans of reference values |
ISO11934:1997 | X和γ辐射非直读或直读式电容型袖珍辐射剂量仪 X and gamma radiation -- Indirect- or direct- reading capacitor-type pocket dosemeters |
ISO12096:1996 | 埋弧焊承压钢管焊缝缺陷的射线照相检验 Submerged arc-welded steel tubes for pressure purposes --Radiographic testing of the weld seam for the detection ofimperfections |
ISO12721:2000 | 无损检测热中子射线照相检验 中子束L/D的测定 Non-destructive testing -- Thermal neutron radiographictesting -- Determination of beam L/D ratio |
ISO 14096-1:2005 | 无损检测射线照相胶片数字系统 第1部分:图像质量参数的定义和定量,标准参考胶片与定性控制 Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control |
ISO 14096-2:2005 | 无损检测射线照相胶片数字系统 第2部分:*低要求 Non-destructive testing -- Qualification of radiographicfilm digitisation systems -- Part 2: Minimum requirements |
ISO14146:2000 | X射线和γ射线个人剂量处理器定期鉴定用的判据及性能极限 |
ISO15708-1:2002 | 无损检测 辐射方法计算机层析照相 **部分:原理 Non-destructive testing -- Radiation methods -- Computed tomography -- Part 1: Principles |
ISO15708-2:2002 | 无损检测 辐射方法计算机层析照相 **部分:检验操作方法 Non-destructive testing -- Radiation methods -- Computedtomography -- Part 2: Examination practices |
ISO 17636:2003 | 焊缝无损检测熔化焊焊缝的射线照相检测 Non-destructive testing of welds -- Radiographic testing of fusion-welded joints |
ISO 18918-2000 | 影像材料 经处理照相感光板 存储方法 |
ISO 18928-2002 | 影像材料-未处理的照相胶片与相纸-储存方法 |
ISO 19232-1:2004 | 无损检测射线照相的图像质量 第1部分:像质计(丝型)-像质指数的确定 Non-destructive testing -- Image quality of radiographs -- Part 1: Image quality indicators (wire type) -- Determination of image quality value |
ISO 19232-2:2004 | 无损检测射线照相的图像质量 第2部分:像质计(阶梯/孔型)-像质指数的确定 Non-destructive testing -- Image quality ofradiographs -- Part 2: Image quality indicators (step/holetype) -- Determination of image quality value |
ISO 19232-3:2004 | 无损检测射线照相的图像质量 第3部分:黑色金属的像质等级 Non-destructive testing -- Image quality ofradiographs -- Part 3: Image quality classes for ferrousmetals |
ISO 19232-4:2004 | 无损检测射线照相的图像质量 第4部分:像质指数与像质表的实验评估 Non-destructive testing -- Image quality of radiographs -- Part 4: Experimental evaluation of image quality values and image quality tables |
ISO 19232-5:2004 | 无损检测射线照相的图像质量 第5部分:像质计(双丝型)-图像不清晰度的确定 Non-destructive testing -- Image quality ofradiographs -- Part 5: Image quality indicators (duplex wiretype) -- Determination of image unsharpness value |
ISO/TS 21432:2005 | 无损检测利用中子衍射确定残余应力的标准试验方法 Non-destructive testing -- Standard test method fordetermining residual stresses by neutron diffraction |
IIWVA339-83,VF-134-83 | 焊缝常规射线照相检测验收标准(INDT,85-3) |
IEC336-1993 | 医用X射线管焦点特性 |
国际电工委员会(IEC)标准 |
IEC532:1992 | 辐射防护检测仪表安装式剂量率计 用作辐射能量在50KeV和7MeV之间X射线和γ射线的报警装置和监测器 |
IEC1017:1994 | 辐射防护检测仪表用于测量γ或X辐射以监控环境的便携式、可移动式或安装式设备 第2部分:集成组件 |
IEC1137:1992 | 辐射防护检测仪表装入式个人表面污染监测装置 低能X和γ发射体 |
IEC1283:1995 | 辐射防护检测仪表用于X、γ和高能β辐射的直读式个人等效剂量(率)监测器 |
IEC1301:1994 | 核检测仪表用于NIM测试仪的数字式总线 |
IEC1306:1994 | 核检测仪表建立在核辐射测量装置上的微处理器 |
IEC1322:1994 | 辐射防护检测仪表安装式等效剂量率计 用作辐射能量从热中子到15MeV中子辐射的报警装置和监测器 |
IEC1323:1995 | 辐射防护检测仪表 中子辐射直读式个人等效剂量及/或等效剂量率监测器 |
IEC1336:1996 | 核检测仪表利用致电离辐射的厚度测量系统 定义和检测方法 |
IEC1452:1995 | 核检测仪表放射性核素γ射线发射率的测量 锗分光计的校准和利用 |
IEC1525:1996 | 辐射防护检测仪表 X、γ、高能β和中子射线 直读式个人等效剂量计和/或个人等效剂量率剂量计 |
IEC60522:1999 | X射线管组件固定滤除的测定 |
IEC61526:1998 | 辐射防护检测仪表 对于X、γ和β射线个人等效剂量Hp(10)和Hp(0.07)的测量 直读式个人等效剂量及/或等效剂量率剂量计 |
IEC61560:1998 | 辐射防护检测仪表用于毛皮和其他织物试样辐射检测装置 |
IEC61675/1:1998 | 放射性检查成像装置特性和试验条件 第1部分:正电子发射层析照相机 |
IEC61675/2:1998 | 放射性检查成像装置特性和试验条件 第1部分:单光子发射计算机层析照相机 |
前苏联标准: |
гост2512-69 | 焊缝的射线透照检测方法 |
гост7428-75 | χ射线机的一般技术条件 |
гост7512-75 | 焊接接头的射线检测方法 |
гост15843-70 | 工业射线照相附件的主要尺寸 |
гост16001-76 | 钴60同位素γ射线探伤机的型号,主要参数和尺寸 |
гост16002-76 | 铯137同位素γ射线探伤机的型号,主要参数和尺寸 |
гост16003-76 | 铱192同位素γ射线探伤机的型号,主要参数和尺寸 |
гост16004-70 | γ射线探伤机用辐射源技术要求和试验方法 |
гост16759-71 | γ射线探伤机术语和定义 |
гост16760-75 | γ射线探伤机的一般技术要求 |
гост16761-71 | γ射线探伤机的主要参数 |
гост18061-80 | 板材和带材放射性同位素测厚仪的一般技术要求 |
гост18445-73 | 密封式放射性同位素辐射源术语和定义 |
гост19614-74 | γ射线检测的分类依据 |
гост18701-80 | 板材和带材放射性同位素测厚仪的验收规程和试验方法 |
гост19648-74 | 板材和带材放射性同位素测厚仪术语和定义 |
гост19745-74 | 密封式放射性同位素辐射源的气候与机械的影响,牢固程度标准 |
гост20426-82 | 射线无损检测方法应用范围 |
гост23764-79 | γ射线探伤机一般技术条件 |
гост25113-86 | 工业探伤用X射线仪器通用技术条件 |
гост22091-84 | X射线仪器参数测量 |
No.802-71 | 用自射线照相法研究金属 |
OCT190427-94 | 产品质量航空工业用铝合金及镁合金铸造零件及半成品的射线照相法无损检验一般要求 |
ПИ1.2.226-83 | 铸造零件的X射线检验 |